Supporting inheritance hierarchy changes in model-based regression test selection

Software and Systems Modeling - Models can be used to ease and manage the development, evolution, and runtime adaptation of a software system. When models are adapted, the resulting models must be...     

Study of the impact of a new hurdle technology composed of electro‐activated solution and low heat treatment on the canned pea and corn quality and microbial safety

The objective of this work was to evaluate the quality of sterilised canned pea and corn in electro‐activated brine solutions at moderate temperatures. The lowest change in vitamin C was associated with the lowest heat treatment, while the short treatment time resulted in significant changes in texture and colour of vegetables. Best texture profile was obtained with the acid electro‐activated brine solution for pea and corn. The neutral electro‐activated brine solution resulted in a less firm texture for pea and corn. The green colour and brightness of canned pea were higher when neutral solution was used (a* = ?8.4 ± 0.3) than for the acidic one (a* = ?3.7 ± 0.6). The yellowness of corn was better with the neutral electro‐activated brine solution (b* = 36.32 ± 1.24) than with the acidic one (b* = 28.44 ± 2.39). Thirty‐three percent decrease of energy consumption was obtained using the electro‐activation technology.     

Numerical and experimental investigation of a thermosiphon solar water heater system thermal performance used in domestic applications

The thermosiphon is a passive heat exchange method, which circulates a fluid within a system without the need for any electrical or mechanical pumps. The thermosiphon is based on natural convection where the thermal expansion occurs when the temperature difference has a corresponding difference in density across the loop. Thermosiphons are used in different applications such as solar energy collection, automotive systems, and electronics. The current study aims to investigate thermosiphon thermal performance used in domestic applications. The thermal performance of a thermosiphon has been studied by many researchers; however, according to the knowledge of the authors, the influence of the amount of the working fluid on the thermal output has not yet been investigated. Therefore, the influence of the amount of working fluid within the riser pipe has been investigated on the thermal performance of the thermosiphon. In the current study, a computational fluid dynamics model is involved. This model has been validated by comparison with experimental findings. The maximum variation between numerical and experimental results is 14.2% and 11.2% for the working fluid at the inlet and outlet of the absorber pipe, respectively. Furthermore, the results show that the amount of working fluid inside the closed thermosiphon has a great influence on the thermal performance of the system. Additionally, it is found that Case-B, when the amount of working fluid is less than by 10% compared to the traditional model, is the best case among all cases under study. Furthermore, a correlation equation to predict water temperature at the exit of the absorber pipe has been established with an accuracy of 95.05%.     

High‐performance electromagnetic interference shielding material based on an effective mixing protocol

A facile and economic method is developed for the fabrication of new lightweight materials with high electromagnetic interference (EMI) shielding performance, good mechanical properties and low electrical percolation threshold through melt mixing. Electrical properties, DC conductivity, EMI shielding performance and mechanical properties of poly(trimethylene terephthalate) (PTT)/multiwalled carbon nanotube (MWCNT) nanocomposites with varying filler loading of MWCNTs were investigated. High‐resolution transmission electron microscopy was used to determine the distribution of MWCNTs in the PTT matrix. The newly developed nanocomposites show excellent dielectric and EMI shielding properties. Theoretical electrical percolation threshold was achieved at 0.21 wt% loading of MWCNTs, due to the high aspect ratio and the three‐dimensional network formation of MWCNTs. Experimental DC conductivity values were compared with those of theoretical models such as the Voet, Bueche and Scarisbrick models, which showed good agreement. The PTT/3% MWCNT composite showed an EMI shielding value of ～38 dB (99.99% attenuation) with a sample thickness of 2 mm. Power balance was used to determine the actual contribution of reflection, absorption and transmission loss to the total EMI shielding value. The nanocomposites showed good tensile and impact properties and the composite with 2% MWCNTs exhibited an improvement in tensile strength of as much as 96%. © 2018 Society of Chemical Industry     

Three-level designs: Evaluation and comparison for screening purposes

Since their introduction by Box and Hunter, resolution criteria have been widely used when comparing regular fractional factorials designs. In this article, we investigate how a generalized resolution criterion can be used to assess some recently developed three-level screening designs, such as definitive screening designs (DSDs) and screening designs from weighing matrices. The aim of this paper is to capture the projection properties of those three-level screening designs, complementing the work of Deng and Tang, who used generalized resolution and minimum aberration criteria for ranking different two-level designs, particularly Plackett-Burman and other nonregular factorial designs. An advantage of generalized resolution, extended here to work on three-level designs, is that it offers a useful criterion for ranking three-level screening designs, whereas the Deng and Tang resolution is used mainly for the assessment of two-level designs. In addition, we applied a projection estimation capacity (PEC) criterion to select three-level screening designs with desirable properties. Practical examples and the best projections of the designs are presented in tables.     

The use of basalt powder as a natural heterogeneous catalyst in the Fenton and Photo-Fenton oxidation of cationic dyes

The use of naturally present heterogeneous catalysts has recently been an essential issue in the Fenton and photo-Fenton processes. In this study, the uses of basalt as a catalyst for the Fenton and photo-Fenton reactions for methylene Blue (MB) and Basic Red 18 (BR18) degradations were investigated. Basalt was selected because of the presence of the iron (III) oxide in the structure. Basalt was characterized by X-Ray Fluorescence (XRF) and X-Ray Diffraction (XRD) analysis to obtain the chemical composition and the crystalline phase. The surface charge and the surface area were obtained by zeta potential and Brunauer Emmett-Teller (BET) analysis. Fourier Transform Infrared Spectroscopy (FTIR) and scanning electron microscope (SEM) were utilized to explore the functional group and the surface morphology. Fenton and photo-Fenton processes were applied to explore the best degradation method. Adsorption was also tested and the adsorption process had minimum removal efficiency (12% for MB and 17% for BR18). The removal efficiencies for MB and BR18 by the Fenton process were 87% and 28%, respectively. The photo-Fenton process had maximum removal efficiency with 100% for MB and 70% for BR18. The optimum conditions were 70 mg/L dye concentration, 5 mM H₂O₂, 1.0 g/L basalt loading and pH 2. Basalt has shown reuse capability as a catalyst for three consecutive cycles.